MARC details
| 000 -CABECERA |
|---|
| campo de control de longitud fija |
10618nam a22004815i 4500 |
| 001 - NÚMERO DE CONTROL |
|---|
| campo de control |
119205 |
| 003 - IDENTIFICADOR DEL NÚMERO DE CONTROL |
|---|
| campo de control |
ES-MaUEC |
| 005 - FECHA Y HORA DE LA ÚLTIMA TRANSACCIÓN |
|---|
| campo de control |
20230102113935.0 |
| 006 - CÓDIGOS DE INFORMACIÓN DE LONGITUD FIJA--CARACTERÍSTICAS DEL MATERIAL ADICIONAL |
|---|
| campo de control de longitud fija |
a||||fo|||| 00| 0 |
| 007 - CAMPO FIJO DE DESCRIPCIÓN FÍSICA--INFORMACIÓN GENERAL |
|---|
| campo de control de longitud fija |
cr nn nnnaamaa |
| 008 - DATOS DE LONGITUD FIJA--INFORMACIÓN GENERAL |
|---|
| campo de control de longitud fija |
200214s2020 si | s |||| 0|eng d |
| 020 ## - NÚMERO INTERNACIONAL ESTÁNDAR DEL LIBRO |
|---|
| Número Internacional Estándar del Libro |
9789811516160 |
| 024 7# - IDENTIFICADOR DE OTROS ESTÁNDARES |
|---|
| Número estándar o código |
10.1007/978-981-15-1616-0 |
| Fuente del número o código |
doi |
| 040 ## - FUENTE DE LA CATALOGACIÓN |
|---|
| Centro catalogador/agencia de origen |
ES-MaUEC |
| Lengua de catalogación |
spa |
| Centro/agencia transcriptor |
ES-MaUEC |
| Centro/agencia modificador |
ES-MaUEC |
| 050 #4 - SIGNATURA TOPOGRÁFICA DE LA BIBLIOTECA DEL CONGRESO |
|---|
| Número de clasificación |
TS183 |
| Número de documento/Ítem |
2020 EB |
| 245 00 - MENCIÓN DE TÍTULO |
|---|
| Título |
Intelligent Manufacturing and Energy Sustainability : |
| Resto del título |
Proceedings of ICIMES 2019 |
| Mención de responsabilidad, etc. |
edited by A.N.R. Reddy, Deepak Marla, Milan Simic, Margarita N. Favorskaya, Suresh Chandra Satapathy |
| 250 ## - MENCIÓN DE EDICIÓN |
|---|
| Mención de edición |
First edition 2020. |
| 264 #1 - PRODUCCIÓN, PUBLICACIÓN, DISTRIBUCIÓN, FABRICACIÓN Y COPYRIGHT |
|---|
| Producción, publicación, distribución, fabricación y copyright |
Singapore |
| Nombre del de productor, editor, distribuidor, fabricante |
Springer Singapore |
| Fecha de producción, publicación, distribución, fabricación o copyright |
2020 |
| 300 ## - DESCRIPCIÓN FÍSICA |
|---|
| Extensión |
1 recurso en línea (XLI, 842 páginas) |
| Otras características físicas |
542 ilustraciones, 437 ilustraciones a color |
| 336 ## - TIPO DE CONTENIDO |
|---|
| Fuente |
rdacontent |
| Término de tipo de contenido |
Texto |
| Código de tipo de contenido |
txt |
| 337 ## - TIPO DE MEDIO |
|---|
| Fuente |
rdamedia |
| Nombre/término del tipo de medio |
electrónico |
| Código del tipo de medio |
c |
| 338 ## - TIPO DE SOPORTE |
|---|
| Fuente |
rdacarrier |
| Nombre/término del tipo de soporte |
recurso electrónico |
| Código del tipo de soporte |
cr |
| 347 ## - CARACTERÍSTICAS DEL ARCHIVO DIGITAL |
|---|
| Tipo de archivo |
Archivo de texto |
| Formato de codificación |
PDF |
| 490 0# - MENCIÓN DE SERIE |
|---|
| Mención de serie |
Smart Innovation Systems and Technologies |
| Número Internacional Normalizado para Publicaciones Seriadas |
2190-3018 |
| Designación de volumen o secuencia |
169 |
| 490 0# - MENCIÓN DE SERIE |
|---|
| Mención de serie |
Engineering (Springer-11647) |
| 505 0# - NOTA DE CONTENIDO CON FORMATO |
|---|
| Nota de contenido con formato |
Performance Evaluation of Multi-Layer Barriers for Machine-Induced Low Frequency Noise Attenuation -- Planing Process on AISI S-1006, S-7 and S-4340, based on Johnson-Cook Model Using Numerical Technique -- An Analytical Study of Diametral Error in Simultaneous Turning Process -- Improvement of Electric Heater Design for Household Cooking Application in Developing Countries -- Embodiment of an Efficient Brown's Gas Compound Fuel Tank -- Automated Solar Photovoltaic Panel Cleaning/Cooling System using Air-water Mixture and Sustainable Solutions to Off-grid Electrification -- Design and fabrication of four way multi hacksaw cutting machine -- Adhesion strength of Plasma Sprayed Coatings-A Review -- An Experimental Studies on the Polymer Hybrid Composites- Effect of fibers on Characterization -- Design Analysis and Pressure Loss Optimization of Automobile Muffler -- Different Module for car parking system demonstrated using Hough Transform for smart city development -- Effect of Arrangement and Number of Water Mist Spray Nozzles on Air Humidity -- Vibration Condition Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert Huang Transform -- Comparative Study of PWM Technique for Switching Loss Reduction and Acoustic Noise Reduction in VSI fed Drives -- An Improved Genetic Algorithm for Production Planning and Scheduling Optimization Problem -- Automatic Calibration for Residential Water Meters by Using Artificial Vision -- "Hardware in The Loop" of a flow plant embedded in FPGA, for process control -- Error Diagnosis in Space Navigation Integration using Wavelet Multi Resolution Analysis with General Regression Neural Network -- Hydromagnetic squeeze film performance of two conducting longitudinally rough elliptical plates -- Performance and Emission Characteristics of Biodiesel from Rapeseed & Soybean in CI Engine -- A Practical approach to Camera Calibration for Part Alignment for Hybrid Additive Manufacturing using Computer Vision -- Development of a colour and orientation detection system for small part feeding -- Comparative analysis on battery used in Solar Refrigerated E-rickshaw in India -- "Application of Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment Effectiveness (OEE): A Case Study" -- CFD analysis to increase heat transfer in pipe with combined effect of circular perforated ring and twisted tape insert -- Study On Solar Parabolic Trough Collector With Different Copper Absorber Tubes -- Harmonic Analysis for Bidirectional Grid Connected Converter for Electrical Vehicle during Charging and Discharging Operations -- Effect of tribolayer on the sliding wear behavior of detonation sprayed Alumina-Titania coatings -- Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes -- Review on Sliding wear of Ti6Al4V alloy concerning counterface and sliding conditions -- Hardness and Microstructure studies on the effect of Solution treated-age hardened Al-6082 Alloy -- Floating Photo Voltaic Thin Film Technology - A Review -- Effect of Ethanol fumigation on performance and combustion characteristics of Compression Ignition Engine fuelled with Used Cooking Oil Methyl Ester in dual fuel mode -- Estimation and Moderation of Harmonics in Distribution Systems -- Theoretical Evaluation of Energy Performance of a Vapour Compression Refrigeration System Using Sustainable Refrigerants -- Effect of Autofrettage on the properties of the Aluminum Cylinders -- Influence of Graphene and Tungsten Carbide Reinforcement on Tensile and Flexural strength of Glass Fiber Epoxy Composites -- Investigation of partial discharge due to copper spherical particle in power transformer under various oil flow models using CFD -- A high power high frequency isolated DC-power supply for electrical vehicle charging application -- Effect of Slicing thickness and Increment on the design of patient specific implant for Total Knee Replacement (TKR) using Magnetic Resonance Imaging (MRI) - A case study -- Microstructure and Hardness Behavior Sudy of Carbon Nanotube in Aluminium Nanocomposites -- Comparison of Electric field with and without corona ring for 66kV line insulator -- Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece -- The Effect of Recrystallization on Electrical Resistivity of Stir Casted SiCP/AA6061 Composite after Shot Peening -- Static Stress Analysis of WYE-Piece for penstock application -- Comparative Investigation on Gas Tungsten Arc Welding and Friction Stir Welding of Electrolytic Tough Pitch Copper Plates -- Synthesis and Characterisation of Functionally Graded Ceramic Material for Aerospace Applications -- CI Engine Characteristic Investigation by Application of Metal Based Additives with Biodiesel Blends -- Simulation of underground cable faults (defects) with the detection of partial discharge -- Comparison of CI Engine performance parameters and Emissions by varying designs of Intake Manifolds -- Variation of Time Lag, Decrement Factor and Inside Surface Temperature with Solar Optical Properties of Building Envelope in Different Climatic Zones of India -- Study On Tensile and Hardness Properties of Al7075 Alloy Reinforced With Graphite, Mica and E-Glass -- ANN based fault classification and section identification technique using superimposed currents for three-terminal transmission line -- An analytical investigation for combined pressure driven and electroosmotic flow without the Debye-Huckel approximation -- Addressing the Green tribology advancement, future development and challenges -- Effect of Drying Temperature to the Drying Characteristic, Morphology and Peak Viscosity of Traditionally Processed Sago Starch (Lemantak) -- Evaluating Mechanical Properties of Egg Shell and Coco Peat Reinforced Epoxy Composite -- Design Modification of Rear Axle Housing by Fatigue Failure Analysis -- Mixture Design using Low Cost Adsorbent Materials for Decolourisation of Biomethanated Distillery Spent Wash in Continuous Packed Bed Column -- Prediction of the WPPO Biodiesel Fuelled HCCI Engine Using Artificial Neural Networks -- Dimensional Analysis of Form Drilling parameters by Buckingham pi theorem and optimization of heat generation in Form drilling process by Taguchi -- Comparison of ductile, flexural, impact and hardness attributes of sisal fiber reinforced polyester composites -- Optimization of EDM Process Parameters using Standard Deviation and Multi-Objective Optimization on the basis of Simple Ratio Analysis (MOOSRA) -- Modeling and Simulation of Trans Z-source Inverter with Maximum Constant Boost PWM Control for Solar PV System -- Driver Drowsiness Monitoring System -- Detection and Control of Water Leakage in Pipelines and Taps Using Arduino Nano Microcontroller -- Smart Automated Processes for Bottle-filling Industry using PLC-SCADA System -- Effect of Stirring Speed During Casting on Mechanical Properties of Al-Si Based MMCs -- Exploration of Pillars of Industry 4.0 using Latent Semantic Analysis Technique -- An Overview of Different Topologies of DC-DC Bidirectional Converter for Different Applications -- An Approach to detect and classify defects in Cantilever Beams using Dynamic Mode Decomposition and Machine Learning -- Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device -- Fuzzy Regenerative Braking Strategy -- A New Framework for Secure utsourcing of Medical Data -- A Comprehensive View for Providing the Decision on Medicare data -- Predicting Cardiac-Arrhythmia Using QRS Detection and Multi-Layer Perceptron -- Full Length Driver Drowsiness Detection Model - Utilising Driver Specific Judging Parameters -- Enterprise Reporting Solution on Integrating Business Intelligence for Operational and Financial Data -- Accelerating The Classifier Training Using Various Boosting Schemes Within Cascades Of Boosted Ensembles (Cobes) -- Service Layer Security Architecture For Iot Using Biometric Authentication And Cryptography Technique. |
| 520 3# - SUMARIO, ETC. |
|---|
| Sumario, etc. |
This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability. |
| 988 ## - NOTA LOCAL 598 |
|---|
| Nota local 598 (boletines) |
Springer_Engineering_31032020 |
| 650 #7 - PUNTO DE ACCESO ADICIONAL DE MATERIA--TÉRMINO DE MATERIA |
|---|
| Fuente del encabezamiento o término |
embne |
| Término de materia o nombre geográfico como elemento de entrada |
Procesos de fabricación |
| Subdivisión de forma |
Congresos y asambleas |
| 9 (RLIN) |
163432 |
| 710 2# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE ENTIDAD CORPORATIVA |
|---|
| Nombre de entidad corporativa o nombre de jurisdicción como elemento de entrada |
SpringerLink (Online service) |
| 9 (RLIN) |
106996 |
| 700 1# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE PERSONA |
|---|
| Nombre de persona |
Reddy, A.N.R |
| Término indicativo de función/relación |
editor |
| Código de función/relación |
edt |
| -- |
http://id.loc.gov/vocabulary/relators/edt |
| 700 1# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE PERSONA |
|---|
| Nombre de persona |
Marla, Deepak |
| Término indicativo de función/relación |
editor |
| Código de función/relación |
edt |
| -- |
http://id.loc.gov/vocabulary/relators/edt |
| 700 1# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE PERSONA |
|---|
| Nombre de persona |
Simic, Milan |
| Término indicativo de función/relación |
editor |
| Código de función/relación |
edt |
| -- |
http://id.loc.gov/vocabulary/relators/edt |
| 700 1# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE PERSONA |
|---|
| Nombre de persona |
Favorskaya, Margarita N |
| Término indicativo de función/relación |
editor |
| Código de función/relación |
edt |
| -- |
http://id.loc.gov/vocabulary/relators/edt |
| 700 1# - PUNTO DE ACCESO ADICIONAL--NOMBRE DE PERSONA |
|---|
| Nombre de persona |
Satapathy, Suresh Chandra |
| Término indicativo de función/relación |
editor |
| Código de función/relación |
edt |
| -- |
http://id.loc.gov/vocabulary/relators/edt |
| 773 0# - ENLACE AL DOCUMENTO FUENTE/ENTRADA DE REGISTRO ANFITRIÓN |
|---|
| Título |
Springer eBooks |
| 776 08 - ENTRADA/ENLACE A UN FORMATO FÍSICO ADICIONAL |
|---|
| Información de relación/Frase instructiva de referencia |
Printed edition: |
| Número Internacional Estándar del Libro |
9789811516153 |
| 776 08 - ENTRADA/ENLACE A UN FORMATO FÍSICO ADICIONAL |
|---|
| Información de relación/Frase instructiva de referencia |
Printed edition: |
| Número Internacional Estándar del Libro |
9789811516177 |
| 776 08 - ENTRADA/ENLACE A UN FORMATO FÍSICO ADICIONAL |
|---|
| Información de relación/Frase instructiva de referencia |
Printed edition: |
| Número Internacional Estándar del Libro |
9789811516184 |
| 856 40 - LOCALIZACIÓN Y ACCESO ELECTRÓNICOS |
|---|
| Identificador Uniforme del Recurso |
https://go.openathens.net/redirector/universidadeuropea.es?url=https://doi.org/10.1007/978-981-15-1616-0 |
| Nota pública |
Acceso a este recurso digital (usuarios Universidad Europea de Madrid) |
| 999 ## - NÚMEROS DE CONTROL DE SISTEMA (KOHA) |
|---|
| -- |
1 |
| 942 ## - ELEMENTOS DE PUNTO DE ACCESO ADICIONAL (KOHA) |
|---|
| Fuente del sistema de clasificación o colocación |
Library of Congress Classification |
| Tipo de ítem Koha |
LIBRO-E NO PRÉSTAMO |
| 998 ## - DATOS ESTADÍSTICOS |
|---|
| Fecha de catalogación |
04/2020 |
| Tipo de materia |
E-book |
| Catalogador |
Irene Bastante |
| Catalogado |
Sí |